| Fordson F |
||||
| Rear Axle |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1 | Rear axle shaft | $75.00 | ||
| S-10 | Rear axle housing 1/2 in. pipe plug | $0.75 | ||
| S-11 | Rear axle lube fitting | $5.40 | ||
| S-13 | Differential gear lock ring | $2.50 | ||
| S-14 | Differential pinion spider | $45.00 | ||
| S-15 | Differential pinion | $25.00 | ||
| S-16 | Differential housing | $35.00 | ||
| S-17 | Differential housing bolt | $0.85 | ||
| S-18 | Differential housing bolt nut | $0.25 | ||
| S-19-NEW | New Differential housing ball bearing | View Details | $225.00 | |
| S-1-A | Rear axle shaft gear | $40.00 | ||
| S-1-B | Rear axle shaft & gear | $115.00 | ||
| S-2 | Rear axle housing - right or left | $65.00 | ||
| S-20-B | Worm gear | $85.00 | ||
| S-21-C | Worm & nut assembly- right hand | $75.00 | ||
| S-21-D | Worm & nut assembly- left hand | $75.00 | ||
| S-22-C | Worm shaft thrust roller bearing assembly ( NEW) | $195.00 | ||
| S-22-C | Worm shaft thrust roller bearing assembly (USED) | $128.00 | ||
| S-25 | Worm nut- right hand thread | $4.50 | ||
| S-25-B | Worm nut- left hand thread | $4.50 | ||
| S-26 | Worm shaft thrust roller bearing race | $0.00 | ||
| S-27 | Rear axle grease cup | $18.25 | ||
| S-3 | Rear axle housing cap screw | $0.85 | ||
| S-4 | Rear axle housing gasket - right or left | $9.08 | ||
| S-5/6 | Rear axle roller bearing & sleeve assembly | $79.50 | ||
| S-8 | Rear Axel Shaft Felt Retainer -Early (1918 - 1920) | $16.50 | ||
| S-8-B | Rear axle shaft felt | $3.50 | ||
| S-9 | Felt Seal for S-9-C | $9.75 | ||
| S-9-C | Rear Axel Felt Retainer Improved | View Details | $44.50 | |
| S-9-C/D/E | Rear axle shaft felt retainer & seal assembly | $77.75 | ||
| S-9-D | Rear axle shaft felt washer & seal | $23.50 | ||
| S-9-E | Rear axle shaft grease retainer gasket | $3.65 | ||
|
|
||||
| Front Axle |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-51 | Front axle (early) | $35.00 | ||
| S-51-B | Front axle (late) | $75.00 | ||
| S-52 | Front axle trunnion | $15.75 | ||
| S-52-B | Front axle trunnion pin | $5.50 | ||
| S-53 | Front axle trunnion bushing | $5.00 | ||
| S-53-B | Front axle trunnion cotter | $0.35 | ||
| S-54 | Radius rod | $35.00 | ||
| S-55 | Radius rod bushing | $3.50 | ||
| S-56 | Radius rod pin | $4.50 | ||
| S-56-C | Radius rod pin-rear | $0.00 | ||
| S-57 | Radius rod bolt | $2.50 | ||
| S-58 | Radius rod bolt & Spindle Arm Ball nut | View Details | $1.50 | |
| S-59 | Spindle body | $40.00 | ||
| S-60 | Spindle body bushing | $5.00 | ||
| S-61 | Spindle pin | $24.00 | ||
| S-62 | Spindle pin washer | $1.50 | ||
| S-63 | Front wheel dust ring | $16.50 | ||
| S-63-B | Front wheel dust ring felt | $3.50 | ||
| S-64 | Spindle pin grease cup | $11.50 | ||
| S-65 | Spindle felt | $0.45 | ||
| S-66 | Spindle felt retainer | $0.00 | ||
| S-67 | Spindle & Spindle Arm Washer | $1.50 | ||
| S-68 | Spindle pin & Spindle Arm nut | $3.50 | ||
| S-69 | Spindle arm front assembly - right | $12.00 | ||
| S-70 | Spindle arm front assembly - left | $18.00 | ||
| S-71 | Spindle arm bushing | $2.00 | ||
| S-74 | Spindle connecting rod | $18.50 | ||
| S-75 | Spindle connecting rod yoke pin | $4.50 | ||
| S-75-B | Spindle connecting rod yoke pin greasable | $7.50 | ||
| S-76 | Spindle arm ball | $14.50 | ||
| S-78 | Steering gear connecting rod assembly | $32.00 | ||
| S-79 | Steering gear connecting rod | $22.00 | ||
| S-80 | Steering gear connecting rod cap | $8.50 | ||
| S-81/82 | Steering gear connecting cap bolt & nut | $1.25 | ||
| S-83-B | Front axle rubber block | $0.00 | ||
| S-84 | Front axle spring seat | $0.00 | ||
| S-86 | Trunnion pin washer | $1.25 | ||
|
|
||||
| Wheels |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-100 | Front wheel assembly - steel | $150.00 | ||
| S-100-A | Front wheel assy- cast iron (English/Irish) | $200.00 | ||
| S-100-B | Front wheel assy- rubber (industrial) | $200.00 | ||
| S-101 | Front wheel cap | $7.00 | ||
| S-102/103 | Front wheel roller spindle bearing & cup-outer | $125.00 | ||
| S-104/105 | Front wheel roller spindle bearing & cup-inner | $225.00 | ||
| S-106 | Front wheel spindle washer | $2.75 | ||
| S-107 | Front wheel ball bearing-outer | $0.00 | ||
| S-108 | Front wheel ball bearing-inner | $0.00 | ||
| S-120 | Rear wheel assembly - right | $200.00 | ||
| S-121 | Rear wheel assembly - left | $200.00 | ||
| S-122 | Rear wheel hub cap screw | $2.00 | ||
| S-123 | Rear wheel bushing | $14.50 | ||
| S-124 | Rear wheel cleat - right | $12.00 | ||
| S-125 | Rear wheel cleat - left | $12.00 | ||
| S-126 | Spade lug | $9.50 | ||
| S-128 | Rear wheel cleat rivet | $0.68 | ||
| S-129 | Rear wheel hub driver & puller screw | $13.50 | ||
|
|
||||
| Kerosene Tank |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-150 | Kerosene tank cap gasket | $0.45 | ||
| S-151-O | kerosene tank cap - original style | $37.50 | ||
| S-152 | Kerosene tank strap assembly | $25.00 | ||
| S-153 | Kerosene tank strap - rear assembly | $18.00 | ||
| S-154 | Kerosene tank webbing kit | View Details | $22.50 | |
| S-155 | Kerosene tank strap rivet | $0.40 | ||
| S-156 | Kerosene tank strap lock washer | $0.10 | ||
| S-157 | Kerosene tank strap nut | $0.40 | ||
| S-158 | Sediment bulb assembly - early | View Details | $72.50 | |
| S-159 | Sediment bulb flange | $8.95 | ||
| S-160 | Sediment bulb flange gasket | $2.49 | ||
| S-161 | Sediment bulb petcock | $6.95 | ||
| S-162 | Kerosene feed tube (early) | $7.00 | ||
| S-162-B | Kerosene feed tube (late) | $7.00 | ||
| S-163 | Kerosene feed tube pack nut and Sediment bulb packing nut | $2.25 | ||
| S-164 | Sediment bulb packing | $0.45 | ||
|
|
||||
| Gasoline Tank |
||||
| Click to view/hide catalog graphic of these items |
||||
| M-9000 | Tank Sealer | $36.25 | ||
| S-163 | Gasoline feed tube pack nut | $1.75 | ||
| S-176 | Gasoline Starting tank | $200.00 | ||
| S-177 | Gasoline Starting tank cap - original style | $14.00 | ||
| S-178 | Gasoline tank plug | $12.00 | ||
| S-179 | Gasoline tank plug gasket | $2.49 | ||
| S-180 | Gasoline tank petcock | $6.95 | ||
| S-181 | Gasoline feed tube | $7.00 | ||
| S-181-B | Fuel feed tube - Short | $7.00 | ||
| S-182 | Gasoline tank cap screw | $0.75 | ||
| S-183 | Gasoline tank screw lock washer | $0.10 | ||
| S-184 | Auxiliary gas tank plug | $2.95 | ||
| S-185 | Fuel valve - two way | $65.00 | ||
| S-186 | Fuel tank assy - early or late | $0.00 | ||
| S-186-NEW-1 | New Reproduction 1 hole fuel tank assembly - early | View Details | $475.00 | |
| S-186-NEW-2 | Reproduction 2 hole fuel tank assembly - late | View Details | $475.00 | |
| S-187 | Fuel tank outlet cap | $35.00 | ||
| S-188 | Fuel tank outlet gasket | $1.50 | ||
| S-189 | Gasoline tank elbow | $5.25 | ||
| S-190 | Gasoline/kerosene feed tube 3 foot | $7.00 | ||
| S-192 | Sediment bulb assembly - late (Rebuilt) | View Details | $0.00 | |
| S-193 | Sediment bulb screen retainer | $13.75 | ||
| S-194 | Sediment bulb screen assembly | $6.75 | ||
| S-194-D | Fuel drain | $19.00 | ||
| S-195 | Sediment bulb valve handle | $7.50 | ||
| S-196 | Sediment bulb valve packing | $3.45 | ||
| S-197 | Sediment bulb valve stem nut | $0.35 | ||
| S-198 | Sediment bulb valve nut | $4.50 | ||
|
|
||||
| Engine |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-10 | Crankcase pipe plug - early | $0.75 | ||
| S-157 | Crankcase nut | $0.40 | ||
| S-182 | Cylinder front cover cap screw | $0.75 | ||
| S-183 | Cylinder front cover lock washer | $0.10 | ||
| S-199 | Engine Assembly | $0.00 | ||
| S-200 | Cylinder block - early | $350.00 | ||
| S-200-B | Cylinder block - late | $350.00 | ||
| S-201-B | Cylinder head - Model F | $85.00 | ||
| S-201-C | Cylinder head - Model N | $125.00 | ||
| S-202 | Cylinder head cap screw | $4.00 | ||
| S-203 | Cylinder head gasket(1917-1927) | $32.50 | ||
| S-203-B | Cylinder head gasket (1928-1938) | $39.56 | ||
| S-204 | Cylinder head water connection gasket early | $8.65 | ||
| S-204-B | Cylinder head water connection gasket late | $7.88 | ||
| S-205 | Cylinder plug | $0.95 | ||
| S-206 | Cylinder oil pipe | $9.50 | ||
| S-206-B | Cylinder oil pipe - short (1926-1927) | $9.50 | ||
| S-206-C | Cylinder oil pipe | $9.50 | ||
| S-206-D | Cylinder oil pipe bracket | $1.50 | ||
| S-207-B | Cylinder front cover - early | $65.00 | ||
| S-207-C | Cylinder front cover - late | $65.00 | ||
| S-208 | Cylinder front cover bolt | $0.85 | ||
| S-208 | Crankcase bolt | $0.85 | ||
| S-209 | Cylinder front cover bolt nut | $0.25 | ||
| S-210 | Cylinder front cover drain cock | $45.00 | ||
| S-211 | Cylinder front cover seal | $5.33 | ||
| S-212 | Governor hole cover | $14.00 | ||
| S-212-B | Governor hold cover gasket | $3.49 | ||
| S-213 | Cylinder front cover gasket - early | $6.88 | ||
| S-213-B | Cylinder front cover gasket - late | $7.69 | ||
| S-214 | Piston - 4" | $35.00 | ||
| S-214-B | Piston set with rings and pins - 4" | $0.00 | ||
| S-216 | Piston - 4 1/8" | $35.00 | ||
| S-216-B | Piston set with rings and pins - 4 1/8" | $0.00 | ||
| S-217 | Piston pin (NEW) | $25.00 | ||
| S-217-B | Piston pin (NEW) .005 oversized | $25.00 | ||
| S-218 | Piston Rings (4'' English) Set for 4 Pistons | View Details | $110.00 | |
| S-218-B | Piston rings (17-27 STD) Set for 4 Pistons | View Details | $104.95 | |
| S-218-C | Piston rings (28-38 STD)(Set for 4 Pistons) | View Details | $128.00 | |
| S-220 | Connecting rod assembly- early | $45.00 | ||
| S-220-B | Connecting rod assembly- late | $45.00 | ||
| S-221 | Connecting rod cap bolt | $2.10 | ||
| S-221-B | Connecting rod lock washer | $0.10 | ||
| S-222 | Connecting rod cap bolt nut | $0.50 | ||
| S-223 | Connecting rod clamp screw | $1.50 | ||
| S-224 | Connecting rod shim set | $4.50 | ||
| S-226 | Crankshaft - used | $75.00 | ||
| S-227 | Crankshaft timing gear | $65.00 | ||
| S-228 | Crankshaft key | $0.60 | ||
| S-229 | Crankshaft bearing cap # 1 & 2 - Used | $25.00 | ||
| S-230 | Crankshaft bearing cap # 3 - Used | $30.00 | ||
| S-231 | Crankshaft bearing cap shim set | $5.50 | ||
| S-232 | Crankshaft bearing cap screw | $1.10 | ||
| S-234 | Camshaft early | $45.00 | ||
| S-234-B | Camshaft late | $75.00 | ||
| S-235 | Camshaft key | $0.59 | ||
| S-236 | Camshaft gear | $75.00 | ||
| S-237-B | Camshaft gear nut, large | $5.50 | ||
| S-237-C | Camshaft gear nut, large | $4.99 | ||
| S-238 | Camshaft gear nut, small | $0.55 | ||
| S-239 | Camshaft timing gear rivet | $0.30 | ||
| S-240 | Camshaft timing gear cap | $0.85 | ||
| S-241 | Valve push rod | $9.75 | ||
| S-242-C | Valve: intake/exhaust (early - 5/16") | $16.50 | ||
| S-242-G | Valve: intake/exhaust (late- 11/32") | $16.50 | ||
| S-243 | Valve spring cover screw | $0.95 | ||
| S-244 | Valve bushing, early | $9.75 | ||
| S-244-B | Valve bushing, late | $9.75 | ||
| S-245 | Valve spring | $8.50 | ||
| S-246 | Valve spring seat - pin type | $6.50 | ||
| S-246-B | Valve spring seat - retainer type | $9.50 | ||
| S-247 | Valve spring seat pin | $0.50 | ||
| S-247-B | Valve spring seat retainer (SET) | $3.25 | ||
| S-248 | Valve spring cover screw | $9.50 | ||
| S-249 | Valve spring cover gasket | $8.50 | ||
| S-250-C | Crankcase - early | $45.00 | ||
| S-250-D | Crankcase - late | $55.00 | ||
| S-251 | Crankcase oil slinger | $6.00 | ||
| S-252 | Crankcase oil screen | $25.00 | ||
| S-253 | Crankcase petcock | $5.10 | ||
| S-254 | Crankcase drain plug - late | $17.50 | ||
| S-255 | Crankcase cover | $45.00 | ||
| S-256 | Crankcase cover gasket | $4.83 | ||
| S-257 | Crankcase gasket | $15.55 | ||
| S-258 | Breather cover - early 1917-1922 | View Details | $0.00 | |
| S-258-B | Breather cover - late1923-1925 | View Details | $25.95 | |
| S-259 | Breather strainer - early | $9.75 | ||
| S-260 | Oil filter - early | $25.00 | ||
| S-260-B | Oil filter - late | $30.00 | ||
| S-261 | Oil filter gauze | $20.00 | ||
| S-262 | Oil filter felt | $3.21 | ||
| S-263 | Oil filter screw | $2.00 | ||
| S-264 | Oil filter cover | $5.00 | ||
| S-265 | Oil filter hinge spring | $2.75 | ||
| S-266 | Oil filter hinge pin | $0.50 | ||
| S-707 | Crankcase drain plug gasket | $0.45 | ||
|
|
||||
| Commutator |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-157 | Commutator spring stud nut | $0.40 | ||
| S-276/8 | Commutator assembly - original style | $75.00 | ||
| S-276/8-B | Commutator assembly - new day style | $0.00 | ||
| S-277 | Commutator lock nut | $1.35 | ||
| S-279 | Commutator case spring | $6.50 | ||
| S-280 | Commutator case spring stud & nut | $7.50 | ||
| S-282 | Commutator Control rod (1917-1927) | $12.50 | ||
| S-282-B | Commutator Control rod (1928-1938) | $12.50 | ||
| S-283 | Commutator felt retainer assembly | $42.50 | ||
| S-283-B | Commutator retainer felt | $2.00 | ||
|
|
||||
| Magneto and Flywheel |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-18 | Flywheel stud nut | $0.25 | ||
| S-300-RB | Magneto coil assembly - rebuilt (NO EXCHANGE) | View Details | $435.00 | |
| S-300-RB (EX) | Magneto coil assembly - rebuilt (EXCHANGE ONLY) | View Details | $285.00 | |
| S-301 | Magneto coil support shim | $0.25 | ||
| S-302 | Magneto coil support screw | $0.35 | ||
| S-303 | Primary contact assembly | $16.25 | ||
| S-305 | Flywheel early | $25.00 | ||
| S-305-B | Flywheel late | $25.00 | ||
| S-306 | Flywheel magnet | $5.50 | ||
| S-307 | Flywheel magnet clamp | $0.75 | ||
| S-308 | Flywheel magnet clamp screw | $1.10 | ||
| S-309 | Flywheel magnet support | $0.75 | ||
| S-310 | Flywheel magnet bolt | $0.75 | ||
| S-311 | Flywheel magnet washer | $0.75 | ||
| S-312 | Flywheel ball bearing - pilot | $58.20 | ||
| S-313 | Flywheel stud | $3.50 | ||
|
|
||||
| Transmission |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-10 | Transmission housing plug | $0.75 | ||
| S-157 | Transmission housing bolt nut | $0.40 | ||
| S-182 | Transmission housing cap screw | $0.75 | ||
| S-208 | Transmission housing bolt | $0.85 | ||
| S-302 | Transmission housing plate cap screw | $0.35 | ||
| S-325 | Transmission housing - early or late | $175.00 | ||
| S-326 | Transmission housing gasket | $11.48 | ||
| S-327 | Transmission housing plate (1917-1922) | $35.00 | ||
| S-327-B | Transmission housing plate (1923-1933) | $35.00 | ||
| S-328 | Transmission housing plate gasket | $5.72 | ||
| S-329 | Transmission housing plate pin | $1.50 | ||
| S-335 | Transmission drive shaft - early | $65.00 | ||
| S-335-B | Transmission drive shaft - late | $65.00 | ||
| S-336 | Transmission shaft bevel gear | $25.00 | ||
| S-337 | Transmission drive shaft nut - early | $5.50 | ||
| S-337-B | Transmission shaft bevel gear lock ring - late | $2.50 | ||
| S-338 | Transmission shaft - upper | $50.00 | ||
| S-338-B | Transmission shaft - upper special ratio | $50.00 | ||
| S-339 | Transmission shaft - lower | $50.00 | ||
| S-340 | Transmission pinion - splined | $30.00 | ||
| S-340-B | Transmission pinion - splined special ration | $30.00 | ||
| S-341 | Transmission pinion - reverse | $30.00 | ||
| S-342 | Transmission gear low | $30.00 | ||
| S-342-B | Transmission gear - low special ration | $30.00 | ||
| S-342-C | Transmission gear low | $30.00 | ||
| S-343 | Transmission gear - large shallow splined | $50.00 | ||
| S-343-B | Transmission gear - large deep splined | $50.00 | ||
| S-343-C | Transmission gear - large special ratio | $50.00 | ||
| S-343-F | Transmission gear - large long hub | $50.00 | ||
| S-344-C | Trans' reverse idler & bushing 5-plate brake | $25.00 | ||
| S-344-D | Trans' reverse idler & bushing 16-plate brake | $25.00 | ||
| S-346/S-346-B | Transmission reverse idler shaft | $0.00 | ||
| S-347/S-346-B | Transmission reverse idler bushing | $0.00 | ||
| S-348 | Transmission reverse idler collar | $0.00 | ||
| S-349 | Transmission shaft ball bearing - small | $0.00 | ||
| S-350 | Transmission shaft ball bearing - large | $0.00 | ||
| S-351 | Trans' drive shaft & large gear ball bearing | $0.00 | ||
| S-352 | Drawbar cap - early | $52.00 | ||
| S-352-B | Drawbar cap - late | $52.00 | ||
| S-353 | Drawbar cap screw | $0.85 | ||
| S-354 | Drawbar cap gasket | $4.04 | ||
| S-355 | Transmission reverse idler shaft cotter pin | $0.35 | ||
| S-356 | Drawbar cap extension | $65.00 | ||
| S-359 | Nut | $0.50 | ||
| S-359-B | Transmission locking screw | $1.25 | ||
|
|
||||
| Brake |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-360 | Trans' plate, reverse idler & brake assy' | $75.00 | ||
| S-361 | Brake shaft | $14.00 | ||
| S-362 | Brake spring | $3.50 | ||
| S-362-B | Brake spring | $3.50 | ||
| S-363 | Brake spring retainer nut | $4.00 | ||
| S-363-B | Brake spring retainer nut | $4.00 | ||
| S-364 | Brake adjusting screw | $3.00 | ||
| S-365 | Brake plate pin | $3.50 | ||
| S-366-B | Brake plate stationary | $4.50 | ||
| S-367-B | Brake plate revolving | $6.50 | ||
| S-368 | Brake hub | $12.00 | ||
| S-368-B | Brake hub plate | $12.00 | ||
|
|
||||
| Gear Shifter |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-182 | Gear shifter cap screw | $0.75 | ||
| S-375 | Gear shifter assembly | $65.00 | ||
| S-376 | Gear shifter plate | $25.00 | ||
| S-377 | Gear shifter plate gasket | $4.40 | ||
| S-379 | Gear shifter lever | $18.00 | ||
| S-380 | Gear shifter lever ball | $6.00 | ||
| S-381 | Gear shifter level ball pin | $1.10 | ||
| S-382 | Gear shifter lever ball retainer | $7.00 | ||
| S-383 | Gear shifter lever ball retainer pin | $0.90 | ||
| S-384 | Gear shifter - upper | $14.50 | ||
| S-385 | Gear shifter - lower | $14.50 | ||
| S-386 | Gear shifter shaft | $6.50 | ||
| S-387 | Gear shifter shaft pin | $1.10 | ||
| S-388 | Gear shifter plunger | $3.50 | ||
| S-389 | Gear shifter plunger spring | $1.25 | ||
| S-390 | Gear shifter plate cap | $17.50 | ||
| S-391 | Gear shifter interlock | $1.50 | ||
|
|
||||
| Clutch |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-400 | Clutch assembly - used | $95.00 | ||
| S-401 | Clutch housing - front | $12.00 | ||
| S-401-B | Clutch housing - front (late) | $12.00 | ||
| S-402 | Clutch housing - rear | $18.00 | ||
| S-402-B | Clutch housing - rear (late) | $18.00 | ||
| S-403/404 | Clutch housing cap screw & nut | $1.10 | ||
| S-405 | Clutch plate - driver ( NEW) | $14.50 | ||
| S-405/406 | Clutch disk set - New | $246.50 | ||
| S-406 | Clutch plate - driven (NEW) | $14.50 | ||
| S-407 | Clutch spring | $1.50 | ||
| S-407-C | Clutch spring - late | $1.50 | ||
| S-408 | Clutch drum & keys (early) | $38.00 | ||
| S-408-B | Clutch drum & keys (late) | $38.00 | ||
| S-409 | Clutch driven drum ring | $3.50 | ||
| S-410 | Clutch driven drum nut | $2.50 | ||
| S-410-B | Clutch lock ring | $3.50 | ||
|
|
||||
| Starting Crank |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-425 | Starting crank Kit --- Assembly Required | View Details | $120.50 | |
| S-426 | Starting Crank | $30.00 | ||
| S-427 | Starting crank handle | $37.50 | ||
| S-428 | Starting crank handle pin | $37.50 | ||
| S-429 | Starting crank handle spring | $8.25 | ||
| S-430 | Starting crank spring - large | $9.25 | ||
| S-431 | Starting crank spacer | $4.00 | ||
| S-432 | Starting pin | $2.50 | ||
| S-433/434 | Starting crank holder assembly | $18.50 | ||
|
|
||||
| Dash |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-154 | Dash webbing kit | $14.50 | ||
| S-155 | Dash split rivet | $0.40 | ||
| S-302 | Clutch lever bracket bolt | $0.35 | ||
| S-353 | Dash cap screw | $0.85 | ||
| S-451-CA | Dash (1917-1921) -Without Breather- | $85.00 | ||
| S-451-CB | Dash (1922 - 1927) -With Breather- | $85.00 | ||
| S-451-DA | Dash (1928-1933) - Irish | View Details | $0.00 | |
| S-451-DB | Dash (1934 - 1945) -English | View Details | $0.00 | |
| S-455 | Dash gasket | $4.50 | ||
| S-456 | Clutch lever bracket assembly | $45.00 | ||
| S-457 | Clutch lever bracket | $12.00 | ||
| S-459 | Clutch lever - early ( no brake ) | $25.00 | ||
| S-459-B | Clutch lever - late ( with brake ) | $22.00 | ||
| S-461 | Clutch release plate | $27.75 | ||
| S-461-B | Clutch release plate | $32.50 | ||
| S-462 | Clutch pedal | $14.00 | ||
| S-463 | Clutch pedal cam | $6.50 | ||
| S-464 | Clutch pedal cam retainer | $0.75 | ||
| S-465 | Clutch pedal spring | $1.25 | ||
| S-75 | Clutch lever pin | $4.50 | ||
|
|
||||
| Steering Gear |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-475 | Steering wheel assembly - early | $264.50 | ||
| S-475-B | Steering wheel assembly - late | $75.00 | ||
| S-476 | Steering wheel rim - wood, 18 | $94.50 | ||
| S-476-B | Steering wheel rim - wood, 17 | $108.00 | ||
| S-477 | Steering wheel rim screw | $0.50 | ||
| S-477-B | Steering wheel lock washer | $0.20 | ||
| S-478 | Steering wheel spider | $170.00 | ||
| S-479-B | Steering shaft - early | $0.00 | ||
| S-479-C | Steering shaft - late | $0.00 | ||
| S-480 | Steering shaft grease cup | $4.40 | ||
| S-481 | Steering shaft nut | $0.55 | ||
| S-482 | Steering sector - early | $0.00 | ||
| S-482-B | Steering sector - late | $65.00 | ||
| S-483 | Steering sector pin | $0.75 | ||
| S-484 | Steering shaft bushing | $5.00 | ||
| S-485 | Steering arm - rear (early) | $14.00 | ||
| S-485-B | Steering arm - rear (late) | $14.00 | ||
|
|
||||
| Throttle Control |
||||
| S-486 | Throttle control handle - early | $7.00 | ||
| S-486-B | Throttle control handle - late | $7.00 | ||
| S-487 | Throttle control lever connection - early | $5.50 | ||
| S-487-C | Throttle control rod coupling | $0.00 | ||
| S-488 | Throttle control rod -- Manual Control | $5.50 | ||
| S-488-B | Throttle control rod & cover assembly | $175.00 | ||
| S-488-C | Throttle control rod -- With Throttle Hookup | $40.00 | ||
| S-488-D | Throttle control rod -- Rod Only | $8.95 | ||
| S-489 | Throttle control lever | $15.50 | ||
| S-489-B | Throttle control lever -- Use S-489 | $9.50 | ||
| S-490 | Throttle control rod lever pin | $0.20 | ||
|
|
||||
| Spark Control |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-491 | Spark Control rod | $12.50 | ||
| S-491-B | Spark control rod- late | $12.50 | ||
| S-492 | Spark control rod support | $3.75 | ||
| S-492-C | Spark control rod support | $3.75 | ||
| S-492-D | Spark control rod support | $3.75 | ||
| S-493-B | Spark control rod lever | $25.00 | ||
| S-493-C | Spark control rod bracket | $6.00 | ||
| S-493-D | Spark control rod bracket | $6.00 | ||
| S-493-E | Spark control rod lever | $12.25 | ||
| S-493-F | Spark control rod bracket | $3.50 | ||
| S-494 | Control rod & priming rod spring | $1.50 | ||
| S-495 | Control rod spring retainer | $6.50 | ||
| S-496 | Control rod spring retainer pin | $0.20 | ||
| S-497 | Priming rod23 3/8 in. | $6.00 | ||
| S-497-B | Priming rod 27 1/4 in. | $8.00 | ||
| S-497-C | Priming rod 20 1/8 in. | $8.00 | ||
| S-497-D | Priming rod 26 3/8 in. | $8.00 | ||
| S-498 | Priming rod plunger | $2.75 | ||
| S-499 | Needle valve adjusting rod | $13.50 | ||
| S-499-B | Needle valve adjusting rod | $6.00 | ||
| S-500 | Throttle control rod yoke | $35.00 | ||
| S-501 | Throttle control cover | $55.25 | ||
| S-502 | Throttle control rod spring | $2.95 | ||
| S-503 | Throttle control rod friction disk | $3.50 | ||
|
|
||||
| Radiator |
||||
| Click to view/hide catalog graphic of these items |
||||
| #1530 | Early Ladder Radiator Side | $425.00 | ||
| S-156 | Radiator connection 7/16" lock washer | $0.10 | ||
| S-157 | Radiator connection bolt nut | $0.40 | ||
| S-182 | Radiator top tank connection cap screw | $0.75 | ||
| S-183 | Radiator connection 1/2" lock washer | $0.10 | ||
| S-208 | Radiator connection bolt | $0.85 | ||
| S-3 | Radiator bottom tank cap screw | $0.85 | ||
| S-404 | Radiator cap screw & nut | $1.10 | ||
| S-525 | Radiator complete | $0.00 | ||
| S-526 | Radiator top tank | $55.00 | ||
| S-527 | Radiator top tank cover | $35.00 | ||
| S-527-B | Radiator top tank cover assembly | $92.00 | ||
| S-528 | Radiator cover bolt | $22.50 | ||
| S-529 | Radiator cover bolt nut | $1.10 | ||
| S-530 | Radiator cover knob | $19.95 | ||
| S-530-S | Radiator knob & bolt set | $43.00 | ||
| S-532 | Radiator tank cap screw | $0.25 | ||
| S-533-B | Radiator top tank stud | $4.95 | ||
| S-534 | Top tank stud nut | $0.20 | ||
| S-535 | Radiator top tank gasket - rubber | $8.16 | ||
| S-535-B | Radiator top tank gasket - cork | $3.30 | ||
| S-535-C | Radiator top tank gasket - N model | $8.16 | ||
| S-536 | Radiator top tank connection | $25.00 | ||
| S-536-B | Radiator top tank connection | $35.00 | ||
| S-538 | Radiator tank cap screw | $0.25 | ||
| S-540 | Radiator core assembly - new | View Details | $550.00 | |
| S-541 | Radiator overflow tube & gland | $30.00 | ||
| S-542 | Radiator strip - front | $8.00 | ||
| S-543 | Radiator strip - rear | $4.00 | ||
| S-544 | Radiator side member ( early ) | $125.00 | ||
| S-544-B-LEFT | Radiator side member (late) - left | $125.00 | ||
| S-544-B-RIGHT | Radiator side member (late) - right | $125.00 | ||
| S-545 | Radiator bottom tank | $85.00 | ||
| S-548 | Radiator tank gasket - top or bottom (2 Req'd) | View Details | $6.50 | |
| S-549 | Radiator top tank gasket | $8.68 | ||
| S-550 | Radiator bottom tank gasket | $5.50 | ||
| S-555 | Water pump shaft | $27.50 | ||
| S-556 | Water pump bushing nut | $22.50 | ||
| S-557 | Water pump & impeller washer | $1.00 | ||
| S-558 | Water pump packing | $4.50 | ||
| S-559 | Water pump bushing - rear | $18.00 | ||
| S-560 | Water pump front | $22.00 | ||
|
|
||||
| Fan |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-575 | Fan assembly | $55.00 | ||
| S-576 | Fan shaft | $12.00 | ||
| S-578 | Fan shaft retainer | $5.00 | ||
| S-579 | Fan blade assembly - early | $25.00 | ||
| S-579-B | Fan blade assembly - late | $25.00 | ||
| S-58 | Fan shaft nut | $0.25 | ||
| S-580 | Fan pulley | $19.50 | ||
| S-580-B | Fan pulley - rear half | $19.50 | ||
| S-580-C | Fan pulley - center | $19.50 | ||
| S-580-D | Fan pulley - front half | $19.50 | ||
| S-581 | Fan pulley gasket | $2.04 | ||
| S-582 | Fan pulley dust ring | $2.00 | ||
| S-583 | Fan pulley plug | $0.80 | ||
| S-584 | Fan drive pulley - early--CALL FOR AVAILABILITY | $100.00 | ||
| S-584-B | Fan drive pulley - late--CALL FOR AVAILABILITY | $100.00 | ||
| S-585 | Fan drive pulley pin | $1.60 | ||
| S-586 | Fan screw | $0.35 | ||
| S-586-B | Fan hub screw | $1.10 | ||
| S-589 | Fan ball bearing | $20.85 | ||
| S-590 | Fan washer | $1.50 | ||
| S-591 | Fan belt - early | $35.00 | ||
| S-591-B | Fan belt - late V type | $42.75 | ||
| S-593 | Fan pulley adjusting spacer | $4.00 | ||
|
|
||||
| Holley 234 & 280 Vaporizer |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-163 | Fuel inlet elbow pack nut | $1.75 | ||
| S-163 | Gasoline shut-off cock pack nut | $1.75 | ||
| S-404 | Exhaust tube bracket cap screw nut | $0.50 | ||
| S-538 | Exhaust tube bracket cap screw | $0.25 | ||
| S-600-B | Vaporizer assembly | $0.00 | ||
| S-601 | Mixing chamber assembly (Holley 234) | $0.00 | ||
| S-601-B | Mixing chamber assembly (Holley 280) | $0.00 | ||
| S-602 | Mixer chamber | $0.00 | ||
| S-602-B | Mixing chamber | $0.00 | ||
| S-603 | Mixing chamber cover | $40.00 | ||
| S-603-B | Mixing chamber cover assembly | $0.00 | ||
| S-604-C | Mixing chamber to manifold cap screw | $0.75 | ||
| S-605 | Mixer chamber cover gasket | $2.14 | ||
| S-606 | Mixer chamber gasket | $1.50 | ||
| S-607 | Air valve | $5.00 | ||
| S-608 | Air valve guide | $62.00 | ||
| S-609 | Throat choke tube | $42.00 | ||
| S-610 | Throat retainer screw | $0.00 | ||
| S-611 | Shifter valve | $35.00 | ||
| S-612 | Shifter valve bottom | $28.00 | ||
| S-613 | Shifter valve plunger | $0.00 | ||
| S-614 | Shifter valve spring | $0.00 | ||
| S-615 | Shifter valve cover | $31.50 | ||
| S-615-B | Shifter valve cover | $0.00 | ||
| S-616 | Strangling throttle lever & valve assembly | $45.00 | ||
| S-616-B | Strangling throttle lever & rod assembly | $18.50 | ||
| S-617 | Strangling throttle plate | $0.00 | ||
| S-618 | Throttle plate pin | $0.50 | ||
| S-618 | Strangling throttle plate pin | $0.00 | ||
| S-619 | Throttle lever assembly | $65.00 | ||
| S-620 | Throttle plate | $0.00 | ||
| S-620-B | Throttle plate | $10.80 | ||
| S-622 | Vapor tube packing nut | $4.25 | ||
| S-623-B | Vapor tube packing | $4.50 | ||
| S-623-C | Vapor tube bushing | $8.25 | ||
| S-624 | Float chamber assembly (Holley 234) | $0.00 | ||
| S-624-B | Float chamber assembly (Holley 280) | $0.00 | ||
| S-625 | Float chamber | $0.00 | ||
| S-625-B | Float chamber | $0.00 | ||
| S-626 | Float chamber cover | $95.00 | ||
| S-626-B | Float chamber cover | $65.00 | ||
| S-627 | Float chamber cover spring | $18.50 | ||
| S-628 | Float chamber cover screw | $0.00 | ||
| S-628-B | Float chamber cover screw | $0.30 | ||
| S-628-B | Mixing chamber cover screw | $0.00 | ||
| S-629 | Float chamber cover spacer | $0.00 | ||
| S-630 | Float chamber Welch plug | $0.30 | ||
| S-631 | Float | $30.00 | ||
| S-631-B | Float | $30.00 | ||
| S-632 | Float lever & clamp spring | $33.50 | ||
| S-632-B | Float lever & screw | $33.50 | ||
| S-633 | Float lever pin | $0.40 | ||
| S-633-B | Float valve lever pin | $0.40 | ||
| S-634 | Float valve | $0.00 | ||
| S-634/5-B | Needle & seat | $20.50 | ||
| S-635 | Float valve seat | $9.00 | ||
| S-636-B | Adjusting needle point & valve assembly | $0.00 | ||
| S-637 | Adjusting needle point spring | $0.00 | ||
| S-638 | Adjusting needle bushing | $26.00 | ||
| S-639 | Adjusting needle point assembly | $35.00 | ||
| S-639-B | Adjusting needle head assembly | $27.50 | ||
| S-640 | Adjusting needle pilot | $25.00 | ||
| S-641 | High & low speed nozzle | $35.00 | ||
| S-642 | Nozzle gasket | $0.00 | ||
| S-643 | Nozzle plug | $22.00 | ||
| S-644 | Nozzle plug gasket | $2.25 | ||
| S-645 | Drain plug | $9.50 | ||
| S-647 | Float chamber gasket | $2.00 | ||
| S-648 | Manifold assembly (Holley 234) | $345.00 | ||
| S-648-B | Manifold assembly (Holley 280) | $345.00 | ||
| S-649-B | Manifold stud | $5.25 | ||
| S-649-B | Exhaust manifold outlet studs | $3.00 | ||
| S-650 | Manifold outlet & studs (Holley 234) | $150.00 | ||
| S-652-B | Manifold outlet stud & nut | $4.25 | ||
| S-653 | Vaporizer to cylinder stud | $4.25 | ||
| S-654 | Vaporizer to cylinder stud nut | $0.85 | ||
| S-655 | Manifold gland | $1.25 | ||
| S-656 | Manifold lock washer | $0.20 | ||
| S-657 | Manifold gasket set with glands | $20.50 | ||
| S-658 | Shunt valve lever assembly (Holley 234) | $195.00 | ||
| S-659 | Shunt valve lever stud | $2.00 | ||
| S-660 | Shunt valve lever stud nut | $18.50 | ||
| S-662 | Exhaust shunt valve assembly (Holley 234) | $93.50 | ||
| S-662-B | Shunt valve & pilot assembly (Holley 280) | $93.50 | ||
| S-664 | Exhaust tube flange | $25.00 | ||
| S-665 | Exhaust tube | $56.00 | ||
| S-666 | Exhaust tube bracket | $21.00 | ||
| S-666-B | Exhaust tube bracket | $21.00 | ||
| S-669 | Mixer chamber stud - short | $2.00 | ||
| S-670 | Mixer chamber stud - long | $2.75 | ||
| S-671 | Float chamber stud | $1.50 | ||
| S-672 | Mixer chamber stud nuts | $0.50 | ||
| S-673 | Mixer chamber stud lock washer | $0.20 | ||
| S-674 | Float chamber stud nut | $0.50 | ||
| S-675 | Float chamber stud nut lock washer | $0.20 | ||
| S-676-B | Brass Elbow - only | $38.00 | ||
| S-676-C | Vapor tube | $44.00 | ||
| S-677 | Fuel inlet elbow | $10.00 | ||
| S-679 | Gasoline shut-off cock (Holley 234) | $55.00 | ||
| S-681 | Mixing chamber plug | $15.95 | ||
| S-682 | Throat retaining screw | $0.00 | ||
| S-683 | Shunt valve latch (Holley 234) | $35.00 | ||
| S-684 | Throttle plate screw | $0.00 | ||
| S-685 | Shunt valve latch pin | $9.00 | ||
| S-686 | Adjusting needle nut | $16.00 | ||
| S-687 | Float chamber throat screw | $0.50 | ||
| S-688 | Manifold outlet & stud assembly (Holley 280) | $125.00 | ||
| S-689 | Float chamber throat screw | $0.00 | ||
| S-690 | Float chamber cap screw | $0.50 | ||
| S-691 | Mixing chamber governor flange cover | $3.00 | ||
| S-692 | Mixing chamber governor flange gasket | $1.99 | ||
| S-693 | Mixing chamber governor flange cover screen | $0.25 | ||
| S-694 | Adjusting needle gasket | $0.00 | ||
| S-695 | Throttle stop lever plate | $0.00 | ||
| S-696 | Throttle rod | $32.00 | ||
| S-697 | Throttle stop screw | $0.25 | ||
| S-698 | Throttle stop lever & rod assembly | $0.00 | ||
| S-699 | Throttle stop lever plate stud | $16.50 | ||
|
|
||||
| Air Washer |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-150 | Air washer plug gasket | $0.45 | ||
| S-182 | Air washer bowl cap screw | $0.75 | ||
| S-404 | Air washer cover cap screw & nut | $1.10 | ||
| S-538 | Air washer cover cap screw | $0.25 | ||
| S-701 | Air washer bowl | $125.00 | ||
| S-701-B | Air washer bowl | $135.00 | ||
| S-702 | Air washer cover | $95.00 | ||
| S-703 | Air washer cover gasket | $7.00 | ||
| S-703-B | Air washer cover gasket | $7.00 | ||
| S-704 | Air washer baffle plate | $35.00 | ||
| S-704-DRY | Fordson early dry air filter | $68.00 | ||
| S-705 | Air washer baffle plate | $40.00 | ||
| S-706 | Air washer tube flange | $85.00 | ||
| S-708 | Air washer tube flange gasket | $2.14 | ||
| S-709 | Air washer tube - small | $6.50 | ||
| S-709-B | Air washer tube - small | $6.50 | ||
| S-709-C | Air washer tube - small | $6.50 | ||
| S-710 | Air Washer tube 7 1/2 in | $10.00 | ||
| S-710-B | Air washer tube 4 1/2 in | $6.00 | ||
| S-710-C | Air washer tube 8 1/2 in | $12.00 | ||
| S-710-D | Air washer tube Curved | $89.00 | ||
| S-711 | Air washer tube felt collar | $1.91 | ||
| S-712 | Air washer tube nut | $30.40 | ||
| S-713-C | Air washer pipe | $9.00 | ||
| S-714 | Air washer flange cap screw | $0.20 | ||
| S-716 | Air washer cap screw | $1.10 | ||
| S-717 | Air washer float assembly | $0.00 | ||
| S-717-B | Air washer float assembly | $0.00 | ||
| S-719 | Air washer filler rubber plug | $20.25 | ||
| S-721 | Air washer base | $35.00 | ||
| S-722 | Air washer gasket - upper | $3.94 | ||
|
|
||||
| Spark Coil |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-714 | Coil box cap screw | $0.20 | ||
| S-726 | Coil box W/cover - early (rebuilt) | $245.00 | ||
| S-726-B | Coil box w/cover - late (rebuilt) | $175.00 | ||
| S-728 | Coil box cover (1919-1923) | $29.50 | ||
| S-728-B | Coil box cover - late | $37.00 | ||
| S-729 | Coil box terminal sleeve | $1.25 | ||
| S-730 | Coil switch assembly | $285.00 | ||
| S-730-B | Coil switch repair kit | $85.00 | ||
| S-730-C | Coil switch plate | $12.50 | ||
| S-731 | Coil switch lever | $6.25 | ||
| S-732-W | Coil unit wooden case - new | $88.00 | ||
| S-733/4 | Coil point set | $10.25 | ||
| S-737 | Coil box stud & nut set | $4.00 | ||
| S-739 | Coil box cap screw nut | $0.40 | ||
| S-740 | Coil box cover gasket | $2.75 | ||
| S-741 | Coil box washer | $0.20 | ||
| S-742-E | Coil box, wood - early | $16.00 | ||
| S-742-L | Coil box, wood - late | $16.00 | ||
| S-743 | Coil box contacts | $11.50 | ||
| S-744 | Coil Box Bolt, Nut, and Washer Kit | $9.50 | ||
| S-746/7/8/9 | Ignition switch terminal assembly | View Details | $28.50 | |
|
|
||||
| Wiring |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-750 | Spark plug wire set (1917-1926) - new | $27.50 | ||
| S-751 | Spark plug wire set (1927-1928) - new | $25.50 | ||
| S-752 | Magneto to coil wire | $5.25 | ||
| S-753 | Communicator wire assembly (1917-1926) - new | $19.50 | ||
| S-753-B | Communicator wire assembly (1927-1932) - new | $22.50 | ||
| S-754 | Communicator cable support | $2.75 | ||
| S-755 | Magneto to switch wire assembly | $5.25 | ||
| S-756 | Wire clamp (1927-1928) wood | $4.50 | ||
| S-756-B | Spark plug harness support assembly (mag conversion) | $14.00 | ||
| S-757 | Spark plug wire set (mag conversion) | $22.50 | ||
| S-758 | Magneto conversion unit (less magneto) | $0.00 | ||
| S-759 | Magneto 4-cylinder | $0.00 | ||
| S-760 | Spark plug set of 4 - #25 | $25.00 | ||
| S-760-N | Spark plug set of 4 - #14 | $25.00 | ||
|
|
||||
| Battery Box |
||||
| S-761 | Hot Shot Battery Box | View Details | $135.00 | |
|
|
||||
| Seat |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-775 | Seat | $125.00 | ||
| S-776 | Seat spring | $20.00 | ||
| S-777 | Seat spring bolt & nut | $2.75 | ||
| S-778 | Seat spring bolt lock washer | $0.20 | ||
| S-779 | Seat spring cap screw | $2.25 | ||
| S-780 | Seat spring cap screw lock washer | $0.30 | ||
|
|
||||
| Foot Bracket |
||||
| S-182 | Foot bracket cap screw | $0.75 | ||
| S-790 | Foot bracket | $65.00 | ||
| S-791 | Foot bracket gasket | $3.95 | ||
|
|
||||
| Tools |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-243 | Tool box cap screw | $0.95 | ||
| S-546 | Tool box washer | $0.50 | ||
| S-800 | Tool box assembly | $52.50 | ||
| S-803 | Pliers | $0.00 | ||
| S-804 | Wescott wrench | $27.00 | ||
| S-806 | Combination spark plug & crankcase bolt wrench | $12.00 | ||
| S-807 | Wrench for 7/16 | $18.75 | ||
| S-808 | Wrench for 9/16" cap screw | $14.00 | ||
| S-809 | Rear wheel wrench | $14.00 | ||
| S-810 | Rear wheel bar | $20.00 | ||
| S-811 | Front hub cap wrench | $25.00 | ||
| S-816 | Screwdriver | $0.00 | ||
|
|
||||
| Belt Pulley Attachment |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-108 | Pulley drive gear bearing - inside | $25.00 | ||
| S-350 | Pulley drive gear bearing - outside | $25.00 | ||
| S-67 | Pulley drive gear washer | $1.50 | ||
| S-68 | Pulley drive gear nut | $3.50 | ||
| S-900 | Pulley attachment complete - Early | $225.00 | ||
| S-900-B | Pulley attachment complete | $245.00 | ||
| S-901 | Pulley drive gear & shaft | $35.00 | ||
| S-902 | Pulley drive gear housing | $25.00 | ||
| S-903-B | Drive pulley assembly - rebuilt (- $50 w/ Exchange) | $275.00 | ||
| S-904 | Drive pulley bushing | $14.00 | ||
| S-905 | Pulley drive packing (felt) | $3.50 | ||
| S-909 | Pulley drive packing retainer--Unavailable | $0.00 | ||
|
|
||||
| Extension Rim |
||||
| S-910-B | Extension Rim | $0.00 | ||
|
|
||||
| Grouser |
||||
| S-925 | Grouser | $0.00 | ||
| S-926 | Grouser bolt | $0.00 | ||
| S-927 | Grouser bolt nut | $0.00 | ||
|
|
||||
| Fenders |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-157 | Fender iron to dash bolt nut | $0.40 | ||
| S-208 | Fender iron to dash bolt - short | $0.85 | ||
| S-931 | Fender - right | $0.00 | ||
| S-932 | Fender - left | $0.00 | ||
| S-933 | Fender iron - right | $0.00 | ||
| S-934 | Fender iron - left | $0.00 | ||
| S-935 | Fender iron to dash bolt - long | $1.10 | ||
| S-939 | Fender axle bracket | $0.00 | ||
| S-940 | Fender axle bracket strap | $20.00 | ||
| S-941 | Fender axle bracket clamp nut | $0.40 | ||
| S-942 | Fender step | $0.00 | ||
| S-942-B | Fender step | $0.00 | ||
| S-947 | Fender support - right | $0.00 | ||
| S-947-B | Fender rear support - right | $0.00 | ||
| S-948 | Fender support - left | $0.00 | ||
| S-948-B | Fender rear support - left | $0.00 | ||
| S-960 | Fender step block set | $3.00 | ||
| S-970 | Fender tool box lid | View Details | $34.00 | |
| S-971 | Fender tool box latch assembly | $5.50 | ||
|
|
||||
| Kingston Vaporizer L-D |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1000 | Vaporizer Assembly | $0.00 | ||
| S-1002 | Manifold assembly | $0.00 | ||
| S-1003 | Manifold Stud | $4.00 | ||
| S-1004 | Booster | $0.00 | ||
| S-1005 | Carburetor connection assembly | $0.00 | ||
| S-1006 | Carburetor connection assembly | $0.00 | ||
| S-1007 | Throttle disc | $9.50 | ||
| S-1015 | Carburetor assembly | $0.00 | ||
| S-1016 | Carburetor body assembly | $0.00 | ||
| S-1017 | Strangling throttle lever rod assembly | $0.00 | ||
| S-1018 | Strangling throttle disc | $3.00 | ||
| S-1020 | Low speed needle, head & stem assembly | $0.00 | ||
| S-1020-B | Low speed needle, head & stem assembly | $0.00 | ||
| S-1021 | Plug | $10.25 | ||
| S-1022 | Low speed needle head nut | $0.00 | ||
| S-1022 | High speed needle stem binder post nut | $0.00 | ||
| S-1023 | High speed needle & head assembly | $30.00 | ||
| S-1024 | High speed needle stem binder post | $0.00 | ||
| S-1024-B | High speed needle stem binder post | $0.00 | ||
| S-1026 | Fuel cap | $0.00 | ||
| S-1027 | Fuel cap gasket - upper | $1.45 | ||
| S-1028 | Fuel cap gasket - upper | $1.25 | ||
| S-1029 | Fuel clamp nut | $8.75 | ||
| S-1030 | Float assembly | $23.50 | ||
| S-1031 | Air valve | $22.00 | ||
| S-1032 | Air valve shaft & plug assembly | $14.00 | ||
| S-1033 | Air valve stop assembly | $0.00 | ||
| S-1034 | Drain Valve | $4.50 | ||
| S-1035/6 | Drain valve assembly | $21.50 | ||
| S-1038/39 | Float valve needle & seat | $30.00 | ||
| S-1040 | Float valve lever pin | $0.50 | ||
| S-1041 | Venture | $0.00 | ||
| S-1042 | Inlet manifold floater | $8.00 | ||
| S-1043 | Screw for fastening venture | $0.00 | ||
| S-1044 | Carburetor connection to manifold gasket | $2.11 | ||
| S-1045 | Carburetor connection to manifold cap screw | $0.00 | ||
| S-1046 | Carburetor connection to manifold bolt | $0.00 | ||
| S-1047 | Carburetor connection to carburetor cap screw nut | $0.00 | ||
| S-1048 | Carburetor connection to carburetor gasket | $3.23 | ||
| S-1049 | Strainer body | $25.00 | ||
| S-1050 | Strainer gasket | $0.75 | ||
| S-1051 | Strainer post | $20.00 | ||
| S-1052 | Strainer screen | $5.00 | ||
| S-1053 | Strainer cup | $21.00 | ||
| S-1054 | Strainer cup gasket | $0.75 | ||
| S-189 | Gasoline inlet elbow | $5.25 | ||
| S-691 | Mixing chamber governor flange cover | $3.00 | ||
| S-692 | Mixing chamber governor flange cover gasket | $1.99 | ||
| S-693 | Mixing chamber gov. flange cover screw | $0.25 | ||
| S-695 | Throttle stop lever plate | $0.00 | ||
| S-699 | Throttle stop lever plate stud | $12.50 | ||
|
|
||||
| Holley 295 Vaporizer |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1101-B | Float chamber assembly | $0.00 | ||
| S-1102-B | Float chamber & plug assembly | $0.00 | ||
| S-1103 | Fuel passage plug | $0.00 | ||
| S-1104-B | Float chamber cover & bracket assembly | $44.50 | ||
| S-1105 | Drain valve plug & handle assembly | $12.50 | ||
| S-1106 | Adjusting needle assembly | $33.75 | ||
| S-1107/13 | Float valve needle & seat | $20.50 | ||
| S-1108 | Adjusting needle seat assembly | $18.50 | ||
| S-1109 | Float & lever assembly | $18.50 | ||
| S-1110 | Mixer Chamber Plug Gasket | $0.20 | ||
| S-1111 | Float lever pin | $0.50 | ||
| S-1112 | Float chamber cover screw | $0.35 | ||
| S-1114 | Float chamber cover gasket | $2.05 | ||
| S-1115 | Adjusting needle bushing | $20.25 | ||
| S-1117 | Mixer chamber assembly | $0.00 | ||
| S-1118 | Strangling lever & rod assembly | $0.00 | ||
| S-1119 | Air valve shaft assembly | $0.00 | ||
| S-1120 | Throttle lever & rod assembly | $0.00 | ||
| S-1121 | Mixer chamber primer assembly | $4.50 | ||
| S-1122 | Strangling throttle plate pin | $0.00 | ||
| S-1124 | Throttle stop lever plate | $0.00 | ||
| S-1125 | Throttle stop lever plate stud | $16.50 | ||
| S-1126 | Air valve | $18.00 | ||
| S-1127 | Air valve shaft retainer screw | $0.00 | ||
| S-1128 | Mixer chamber | $0.00 | ||
| S-1129 | Mixer chamber plug | $0.00 | ||
| S-1131 | Throttle plate | $6.50 | ||
| S-1132 | Strangling throttle plate | $6.75 | ||
| S-1136 | Manifold assembly | $345.00 | ||
| S-1138 | Stud nut | $0.60 | ||
| S-1139 | Vapor outlet tube | $6.50 | ||
| S-1140 | Vapor outlet tube nut | $37.50 | ||
| S-1141 | Manifold vaporizing plate bushing | $29.00 | ||
| S-1142 | Manifold cover | $165.00 | ||
| S-1143 | Float chamber screw | $0.35 | ||
| S-1144 | Fuel jet | $36.00 | ||
| S-1145 | Mixer chamber to manifold screw | $0.00 | ||
| S-1146 | Mixer chamber to manifold gasket | $4.92 | ||
| S-1147 | Manifold cover plate bushing | $25.00 | ||
| S-1148 | Manifold vaporizing plate (stainless steel) | $31.60 | ||
| S-1149 | Manifold cover plate (stainless steel) | $40.85 | ||
| S-1150 | Primary air tube | $9.50 | ||
| S-1151 | Float chamber gasket | $1.50 | ||
| S-1152 | Manifold cover stud | $2.75 | ||
| S-649-B | Exhaust pipe flange stud | $5.25 | ||
| S-691 | Governor flange cover | $3.00 | ||
| S-692 | Governor flange cover gasket | $0.75 | ||
| S-693 | Governor flange cover screw | $0.25 | ||
|
|
||||
| Kingston M-D |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1201 | Manifold assembly | $345.00 | ||
| S-1204 | Mixer chamber assembly | $0.00 | ||
| S-1204-B | Mixer chamber assembly | $0.00 | ||
| S-1205 | Mixer chamber & plug assembly | $0.00 | ||
| S-1205-B | Mixer chamber & plug assembly | $0.00 | ||
| S-1206 | Lever & rod assembly | $35.00 | ||
| S-1209 | Air valve | $29.00 | ||
| S-1210 | Air valve shaft assembly | $0.00 | ||
| S-1211 | Air valve shaft plug | $0.00 | ||
| S-1214 | Throttle stop lever & rod assembly | $0.00 | ||
| S-1222 | Mixing chamber to manifold gasket | $2.07 | ||
| S-1224 | Initial air inlet tube | $9.50 | ||
| S-1225 | Vaporizer outlet tube | $2.50 | ||
| S-1226 | Cover assembly | $150.00 | ||
| S-1226-B | Cover manifold | $0.00 | ||
| S-1227 | Fuel jet | $30.00 | ||
| S-1230 | Float chamber assembly | $0.00 | ||
| S-1231 | Float chamber & plug assembly | $0.00 | ||
| S-1232 | Adjusting needle bushing | $16.00 | ||
| S-1233 | Adjusting needle assembly | $16.95 | ||
| S-1234 | Carburetor drain | $9.50 | ||
| S-1235 | Float chamber cover | $33.75 | ||
| S-1236 | Float chamber lid screw | $0.35 | ||
|
|
||||
| Zenith Gas |
||||
| S-1238 | Float assembly | $18.00 | ||
| S-1240/41 | Needle & seat | $12.50 | ||
| S-1243 | Fuel oil vaporizer plate | $0.00 | ||
| S-1250 | Manifold assembly | $330.00 | ||
| S-1255 | Zenith carburetor | $0.00 | ||
| S-1256 | Carburetor to manifold gasket | $3.68 | ||
| S-1258 | Carburetor body - lower | $0.00 | ||
| S-1258-B | Carburetor body lower assembly | $0.00 | ||
| S-1260 | Carburetor throttle lever & shaft | $46.50 | ||
| S-1261 | Carburetor throttle plate | $0.00 | ||
| S-1262 | Carburetor float (no hangar, float only) | View Details | $29.95 | |
| S-1263 | Carburetor main jet #15 | $8.50 | ||
| S-1264 | Carburetor main gasket | $0.25 | ||
| S-1265 | Main adjusting needle | $38.50 | ||
| S-1266 | Compensator jet | $7.50 | ||
| S-1267 | Compensator jet gasket | $0.40 | ||
| S-1268 | Carburetor idling jet assembly | $32.25 | ||
| S-1269 | Venture | $38.50 | ||
| S-1272 | Carburetor body upper assembly | $0.00 | ||
| S-1273 | Carburetor body gasket | $7.75 | ||
| S-1276 | Needle & seat | $16.00 | ||
| S-1277 | Carburetor connection | $25.00 | ||
| S-1281 | Lever & shaft assembly | $0.00 | ||
| S-1282 | Carburetor throttle plate | $0.00 | ||
| S-1283 | Felt | $2.75 | ||
| S-1284 | Retainer | $5.50 | ||
| S-1285 | Idle needle assembly | $4.50 | ||
|
|
||||
| Governor |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1409 | Governor spring | $11.00 | ||
| S-1411 | Governor weight | $0.00 | ||
| S-1412 | Governor control rod | $0.00 | ||
| S-1413 | Governor control rod | $0.00 | ||
| S-1426 | Governor adjusting screw | $0.00 | ||
| S-1428 | Governor spring & level | $0.00 | ||
| S-1429-C | Governor housing & lever | $50.00 | ||
| S-1430 | Governor housing cover | $28.00 | ||
| S-1441-D | Governor sleeve | $12.00 | ||
| S-1442 | Governor pin | $6.00 | ||
| S-1443 | Governor thrust washer | $24.00 | ||
| S-1445 | Governor weight spring | $0.00 | ||
| S-1446-AR | Governor weights | $0.00 | ||
| S-1447-R | Governor weight retainer | $0.00 | ||
| S-1475 | Governor throttle shaft | $12.50 | ||
| S-1476 | Control housing | $18.00 | ||
| S-1477 | Lever | $7.50 | ||
| S-1480 | Governor control prod | $0.00 | ||
| S-1481 | Governor control rod end | $0.00 | ||
| S-1483-B | Governor control assembly | $38.00 | ||
| S-1492 | Thrust plate | $16.00 | ||
| S-1493 | Thrust bearing | $34.56 | ||
| S-1499-C | Governor lever & cam | $25.00 | ||
|
|
||||
| Magneto |
||||
| Click to view/hide catalog graphic of these items |
||||
| S-1501 | Coupling magneto & impulse assembly | $0.00 | ||
| S-1503 | Magneto gear shaft thrust washer | $0.00 | ||
| S-1505 | Magneto weight arrester plate cover felt | $2.25 | ||
| S-1506 | Magneto bracket with bushing assembly | $28.00 | ||
| S-1507 | Magneto bracket gasket | $4.00 | ||
| S-1508 | Magneto shaft & Gear assembly | $26.00 | ||
| S-1508-B | Magneto shaft & gear assembly | $26.00 | ||
| S-1509 | Magneto bracket - drive shaft bushing | $0.00 | ||
| S-1510 | Magneto gear coupling | $0.00 | ||
| S-1511 | Magneto driving disc | $0.00 | ||
| S-1514 | Magneto impulse coupler spring housing | $0.00 | ||
| S-1515 | Magneto impulse coupler spring | $0.00 | ||
| S-1516 | Magneto impulse coupler weight assembly | $0.00 | ||
| S-1518 | Magneto weight arrester plate assembly | $0.00 | ||
| S-1523 | Magneto impulse coupler hub | $0.00 | ||
| S-1524 | Magneto weight arrester plate assembly | $0.00 | ||
| S-1530 | Magneto grounding brush & spring | $0.00 | ||
| S-1531 | Magneto rotor & gear assembly | $0.00 | ||
| S-1532 | Magneto distributor plate (F-19540-AR) | $0.00 | ||
| S-1532-B | Magneto distributor plate (F-19450-BR) | $0.00 | ||
| S-1533 | Magneto distributor brush & spring | $0.00 | ||
| S-1534 | Magneto interrupter fastening screw | $0.00 | ||
| S-1535 | Magneto interrupter complete | $0.00 | ||
| S-1536 | Magneto contact screw long (F-19544-R) | $0.00 | ||
| S-1537 | Magneto contact screw long (F-19545-R) | $0.00 | ||
| S-1538 | Magneto interrupter level | $0.00 | ||
| S-1539 | Magneto contact support block | $0.00 | ||
| S-1540 | Magneto interrupter housing | $0.00 | ||
| S-1541 | Magneto interrupter end cap assembly | $0.00 | ||
| S-1542 | Magneto interrupter holding spring | $0.00 | ||
| S-1543 | Magneto wrench | $0.00 | ||
| S-1544 | Magneto armature (less bearings) | $0.00 | ||
| S-1545 | Holding spring | $0.00 | ||
|
|
||||
| Sealer |
||||
| M-9000 | Tank sealer Qt. | $36.25 | ||
|
|
||||
| Lubricant |
||||
| 600-W | Gear oil (used in rear axle ) - 1 quart | $9.50 | ||
|
|
||||
| Paint |
||||
| M-210 | Fordson gray paint - 1 gallon | View Details | $52.00 | |
| M-210-Q | Fordson gray paint - quart | View Details | $24.00 | |
| M-210-S | Fordson gray paint - spray can | View Details | $8.25 | |
| M-212 | Fordson red paint - 1 gallon | View Details | $42.00 | |
| M-212-Q | Fordson red paint - quart | View Details | $18.00 | |
| M-212-S | Fordson red paint - spray can | View Details | $8.25 | |
| M-213 | Black paint - 1 gallon | View Details | $33.00 | |
| M-213-Q | Black paint - quart | View Details | $18.00 | |
| M-213-S | Black paint - spray can | View Details | $7.30 | |
| M-214 | Non-sanding primer - 1 gallon | View Details | $42.25 | |
| M-215-D | Fordson N blue paint - 1 gallon | View Details | $69.25 | |
| M-215-D-Q | Fordson N blue paint - quart | View Details | $26.40 | |
| M-215-D-S | Fordson N blue paint - spray can | View Details | $8.25 | |
| M-215-E | Fordson orange paint - 1 gallon | View Details | $55.00 | |
| M-215-E-Q | Fordson orange paint - quart | View Details | $19.75 | |
| M-215-E-S | Fordson orange paint - spray can | View Details | $8.25 | |
|
|
||||
| Publications |
||||
| Pub-101 | Fordson parts catalog & price list | $5.50 | ||
| Pub-102 | Fordson 1925 manual - reprint | $12.50 | ||
| Pub-103 | Fordson 1931 manual - reprint | $12.50 | ||
| Pub-104 | Fordson 1936 price list - reprint | $3.50 | ||
| Pub-105 | Fordson 1930 service bulletin - reprint | $3.50 | ||
| Pub-106 | Fordson 1931 service bulletin - reprint | $3.50 | ||
| Pub-107 | Fordson 1932 service bulletin - reprint | $3.50 | ||
| Pub-108 | Fordson King gov list | $1.50 | ||
| Pub-109 | Fordson taco information | $3.50 | ||
| Pub-110 | Fordson mag changing information | $3.00 | ||
|
|
||||
| Gasket Sets |
||||
| S-1134 | Valve grind set | View Details | $78.03 | |
| S-1234-B | Lower engine gasket set | View Details | $63.63 | |
| S-1334 | Complete radiator gasket set | View Details | $35.34 | |
| S-203-C | Complete Engine Gasket Set | View Details | $179.12 | |
|
|
||||
| Apparel |
||||
| H-502 | Hat | $6.95 | ||
| T-101 | Large T-Shirt | $9.50 | ||
| T-102 | X-Large T-Shirt | $9.50 | ||
| T-103 | XX-Large T-Shirt | $12.50 | ||
|
|
||||
| Tractor Covers |
||||
| C-100 | Ministry of Munitions Cover | View Details | $190.00 | |
| C-101 | Henry Ford & Sons Cover | View Details | $190.00 | |
| C-102 | Detroit, Michigan Cover | View Details | $150.00 | |
| C-103 | Irish Fordson Cover | View Details | $150.00 | |
| C-104 | English Fordson Cover | View Details | $150.00 | |
|
|
||||
home
store
cart
about us
location
dating chart
catalogs
order info
links
classifieds
tractor gallery
